PRODUCTION BOARDS FOR ALL TYPES OF CONCRETE BLOCK MACHINES
We manufacture wooden, polymer and combined production boards in any size. We select the right solution for your equipment, loads and production volumes.
Increase your productivity by 25%
Service life over 10 years
Reduce cement consumption by up to 20%
Our boards are suitable for concrete block machines such as MASA, HESS, SHLOSSER, OMAG, BESSER, ADLER, TECHMATIK, KNAUER, HENKE, ROSAKOMETTA, POYATOS, GEVIT, ZENIT, ERMAK, MUSTAFAYONTAR, GUNFENG, FORMIMPIANTI, AME, ELKON and many others. We manufacture boards in any size. Own production facility.
NEVGREEN production boards
NEVGREEN is not just boards, but the selection of a technological solution for your concrete block machine to increase productivity, stabilize product quality and reduce equipment wear.
Message us in your preferred messenger and we will quickly answer all your questions
NFP-1 production boards
● Improved uniform vibration transmission across the entire board surface
● Core made of multi-layer hardwood veneer (1.5–2 mm lamellas)
● Homogeneous structure without weak zones (unlike solid wood)
● High modulus of elasticity ≥ 13,000 N/mm²
● Polymer coating: working surface — 3 mm, edges — 5 mm
● High wear resistance and abrasion resistance
● Impact-resistant composite coating material (without cracking)
● Water resistance — easy to clean after operation
● Suitable for washing concrete products
● Resistant to chemical and alkaline exposure
● Temperature resistance from -25 °C to +90 °C
● Suitable for steam curing chambers
● Stable geometry and predictable performance in operation
● Reduced vibration time → shorter production cycle
● Productivity increase of up to 25%
● Improved product quality — high repeatability
● RFID tag integration available
● Lightweight compared with 100% composite alternatives
● Core made of multi-layer hardwood veneer (1.5–2 mm lamellas)
● Homogeneous structure without weak zones (unlike solid wood)
● High modulus of elasticity ≥ 13,000 N/mm²
● Polymer coating: working surface — 3 mm, edges — 5 mm
● High wear resistance and abrasion resistance
● Impact-resistant composite coating material (without cracking)
● Water resistance — easy to clean after operation
● Suitable for washing concrete products
● Resistant to chemical and alkaline exposure
● Temperature resistance from -25 °C to +90 °C
● Suitable for steam curing chambers
● Stable geometry and predictable performance in operation
● Reduced vibration time → shorter production cycle
● Productivity increase of up to 25%
● Improved product quality — high repeatability
● RFID tag integration available
● Lightweight compared with 100% composite alternatives
NDP-2 wooden boards with polymer coating
● More rigid vibration transmission compared with boards without polymer coating
● Polymer reinforced with bio-fiber additive
● Suitable for washing concrete products
● Material made from softwood species (lamella width does not exceed the board thickness)
● High-quality wood of zero, first and second grade
● Withstands high bending loads
● High modulus of elasticity ≥ 10,000 N/mm²
● Does not rot or deform
● No deformation under high temperatures from -25 °C to +90 °C
● Resistant to chemical and alkaline exposure
● High-strength C-shaped profile
● Productivity increase of up to 20%
● RFID tag integration available
● Lightweight compared with 100% composite alternatives
● Polymer reinforced with bio-fiber additive
● Suitable for washing concrete products
● Material made from softwood species (lamella width does not exceed the board thickness)
● High-quality wood of zero, first and second grade
● Withstands high bending loads
● High modulus of elasticity ≥ 10,000 N/mm²
● Does not rot or deform
● No deformation under high temperatures from -25 °C to +90 °C
● Resistant to chemical and alkaline exposure
● High-strength C-shaped profile
● Productivity increase of up to 20%
● RFID tag integration available
● Lightweight compared with 100% composite alternatives
NPP-3 polymer boards
● Fully polymer construction (no wood used)
● Homogeneous structure without internal defects or delamination
● High resistance to moisture and aggressive environments
● Not subject to rot, corrosion or biological degradation
● High resistance to alkaline and chemical exposure
● Resistant to abrasive wear
● Stable geometry during operation
● Uniform vibration transmission across the entire surface
● Suitable for intensive production cycles
● Easy cleaning and maintenance
● Can be used in high-humidity conditions
● Service life over 10 years when operating conditions are observed
● Can be manufactured to individual dimensions
● Compatible with automated production lines
● RFID tag integration available
● Homogeneous structure without internal defects or delamination
● High resistance to moisture and aggressive environments
● Not subject to rot, corrosion or biological degradation
● High resistance to alkaline and chemical exposure
● Resistant to abrasive wear
● Stable geometry during operation
● Uniform vibration transmission across the entire surface
● Suitable for intensive production cycles
● Easy cleaning and maintenance
● Can be used in high-humidity conditions
● Service life over 10 years when operating conditions are observed
● Can be manufactured to individual dimensions
● Compatible with automated production lines
● RFID tag integration available
ND-4 wooden production boards
● Minimum service life of 5 years
● Material made from softwood species (lamella width does not exceed the board thickness)
● High-quality wood of first and second grade
● Withstands high bending loads
● High modulus of elasticity ≥ 9,000 N/mm²
● No deformation under high temperatures
● Treated with an oil-based water repellent
● High-strength C-shaped profile
● Material made from softwood species (lamella width does not exceed the board thickness)
● High-quality wood of first and second grade
● Withstands high bending loads
● High modulus of elasticity ≥ 9,000 N/mm²
● No deformation under high temperatures
● Treated with an oil-based water repellent
● High-strength C-shaped profile
Commercial offer for your task
We will calculate the cost of boards based on your equipment and production volumes
NEVGREEN manufactures production boards for all types of concrete block machines — from standard solutions to boards for high-performance lines.
The board design ensures uniform vibration transmission, stable product geometry and reduced equipment wear.
The range includes different types of boards, each optimized for specific operating conditions, production tasks and budgets.
→ NFP-1 (hardwood plywood + polymer coating)
A solution for production facilities with increased requirements for stability and service life. They ensure uniform vibration transmission, precise product geometry and a long service life. Optimal for intensive operation and production of products with high quality requirements.
→ NDP-2 wooden boards with polymer coating
A balanced solution in terms of cost and performance characteristics. They provide high rigidity, wear resistance and stable operation under regular load.
→ NPP-3 polymer boards (100%)
A solution for difficult operating conditions.
Not affected by moisture and chemical exposure, suitable for production facilities with high humidity and intensive cycles. They ensure stable geometry and a long service life.
→ ND-4 wooden production boards
A reliable solution for stable operation under standard conditions.
They provide strength, load resistance and predictable performance in operation at an optimal cost.
We select boards individually according to your production parameters:
Each type of NEVGREEN board is a proven solution in its segment, allowing you to achieve stable results, reduce equipment wear and optimize the production process.
The board design ensures uniform vibration transmission, stable product geometry and reduced equipment wear.
The range includes different types of boards, each optimized for specific operating conditions, production tasks and budgets.
→ NFP-1 (hardwood plywood + polymer coating)
A solution for production facilities with increased requirements for stability and service life. They ensure uniform vibration transmission, precise product geometry and a long service life. Optimal for intensive operation and production of products with high quality requirements.
→ NDP-2 wooden boards with polymer coating
A balanced solution in terms of cost and performance characteristics. They provide high rigidity, wear resistance and stable operation under regular load.
→ NPP-3 polymer boards (100%)
A solution for difficult operating conditions.
Not affected by moisture and chemical exposure, suitable for production facilities with high humidity and intensive cycles. They ensure stable geometry and a long service life.
→ ND-4 wooden production boards
A reliable solution for stable operation under standard conditions.
They provide strength, load resistance and predictable performance in operation at an optimal cost.
We select boards individually according to your production parameters:
- type of concrete block machine
- product format and range
- load level and operating intensity
- product quality requirements
Each type of NEVGREEN board is a proven solution in its segment, allowing you to achieve stable results, reduce equipment wear and optimize the production process.
About us
Our team has been in the market for production boards for concrete block machines for more than 10 years.
Our own production facility is located in Belarus, ensuring full quality control at every stage.
We have already supplied products to more than 15 countries — including Russia, CIS countries, Europe and the Middle East — and we deliver worldwide.
We work with both large manufacturing enterprises and private customers.
Our own production facility is located in Belarus, ensuring full quality control at every stage.
We have already supplied products to more than 15 countries — including Russia, CIS countries, Europe and the Middle East — and we deliver worldwide.
We work with both large manufacturing enterprises and private customers.
Contacts
223716, Republic of Belarus, Minsk Region, Soligorsk District, Krasnodvorsky Village Council, Dubei village, warehouse premises, office 4
© 2006-2026 FABWERK LLC
Get a consultation on boards
We will answer your questions, explain the board options and suggest which solution may suit your production
Commercial offer for your task
We will calculate the cost of boards based on your equipment and production volumes
We will calculate the cost of boards
We take into account the format, load and equipment type. We will send the calculation and production lead time
We will calculate the cost of boards
We take into account the format, load and equipment type. We will send the calculation and production lead time
We will calculate the cost of boards
We take into account the format, load and equipment type. We will send the calculation and production lead time
We will calculate the cost of boards
We take into account the format, load and equipment type. We will send the calculation and production lead time